A useful observation programme begins with a decision that somebody can act on. Before selecting imagery or instruments, define the area of interest, the people responsible for inspecting it, and the time available for a response. This planning perspective connects remote measurements with the practical questions that shape a survey or monitoring service. The aim is to identify which observations would change a decision, how supporting evidence would be collected, and what should happen when information is incomplete. A clear plan makes later technical choices easier to assess against an operational purpose.
This working guide considers building a spacecraft power and energy budget across peatland forest landscapes. The immediate decision is to select locations for hydrological field review. Useful reference evidence includes water-level records, land-cover observations and dated site visits. The case is an illustrative planning context, with assumptions to check against the actual sensor, landscape and project requirements.
Distinguish power from stored energy
A spacecraft electrical power system must generate energy, store it when necessary and distribute it reliably to the loads. Power describes the rate of energy use, while energy describes consumption over an interval. A transmitter may have a high instantaneous demand even if it operates briefly. Conversely, a modest continuous load can dominate the daily energy budget. Both views are needed to size the system.
List operating modes and their duration: standby, imaging, processing, communication, safe mode and any relevant transitions. Include heaters, power conversion losses and supporting electronics rather than counting only the camera and radio. Identify loads that overlap in time and those that can be scheduled separately. Peak current and startup behavior can challenge distribution hardware even when the average energy balance appears comfortable.
Check realistic orbit and lifetime conditions
Solar generation depends on illumination, array orientation, temperature and the condition of the cells and associated hardware. Eclipse intervals require stored energy, and imaging or communication pointing may reduce favorable Sun exposure. Evaluate the time sequence across representative orbits rather than comparing one average generation number with one average load. Consider the expected decline in performance over the mission and apply clearly justified design margins.
Battery sizing must consider usable capacity under the planned temperature, discharge rate and cycling conditions. Nominal capacity alone does not describe what is safely available in service. Charging limits, allowed depth of discharge, ageing and monitoring requirements influence the operating envelope. Thermal design and power planning therefore need to evolve together. A heater can protect a battery while consuming the energy that the battery is expected to deliver.
The distribution system should detect and isolate relevant faults while preserving essential functions. Define which loads are shed when energy becomes scarce and what conditions allow them to return. Safe mode needs its own verified energy balance and a credible path toward recovery. Telemetry should support comparison between predicted and measured generation, consumption and battery behavior. Test the budget with realistic duty cycles, instrument startup sequences and communication sessions, then update the model using measured component performance. A defensible power plan explains the worst cases and the assumptions behind its reserve, allowing observation schedules to be adjusted before they threaten spacecraft survival.
The setting: Peatland forest landscapes
A peatland forest landscape connects vegetation, water conditions, drainage features and land-management history. A satellite image can reveal patterns relevant to these relationships, but a canopy response does not directly measure the depth or condition of the peat below it. Define the monitoring objective carefully. Mapping cover change, identifying areas for hydrological inspection and evaluating a carbon-related parameter require different observations and should not be presented as a single interchangeable result.
A landscape inventory should distinguish forest, open peat, managed land, canals and other surface types that contribute to an observation. Seasonal water conditions and the timing of management events may affect the image record. Optical observations can be limited by cloud and haze, while complementary measurements require their own interpretation. Track usable acquisitions and preserve uncertainty about the timing of a change when it falls within a gap between observations.
Field validation should retain water-level measurements and canopy or land-cover observations as separate evidence streams. Record the date, location and spatial setting of each sample, including its relationship to drainage infrastructure where relevant. A vegetation pattern may help focus a visit without establishing the cause of a hydrological change. More specific claims about emissions, peat condition or restoration performance need suitable measurements and an evaluation method that addresses those variables directly rather than inferring them from greenness alone.
Prioritise alerts using evidence and consequence
An alert is a request for attention, so its design should consider both the evidence available and the cost of responding. Begin by distinguishing a measured change, a proposed interpretation, and the action expected from the recipient. A large numerical difference is not automatically the most urgent case. The significance of the location, the age of the observation, the confidence in the interpretation, and the consequences of delay can all influence priority.
Create a review queue with enough context to support consistent decisions. Useful information can include the supporting dates, quality qualifications, previous observations, geographic unit, and the reason the case entered the queue. Define when an alert can be closed, escalated, or held for another observation. A documented rule is easier to improve than an informal practice that depends entirely on the memory of the operator reviewing the result.
Collect feedback from inspections and operational responses. Record alerts that led to a useful finding, alerts that required no action, and important conditions that the system failed to flag. Review these outcomes across different settings rather than relying only on a total count of alerts. The objective is a queue that directs limited attention towards meaningful decisions, while generating evidence for adjusting thresholds, improving context, and reducing repeated sources of unnecessary work.
Prioritise observations within delivery constraints
An observation has practical value only if it can reach the processing and user workflow in a suitable form and time. Delivery planning therefore belongs alongside acquisition planning. Identify the volume and priority of expected data, the opportunities available for transfer, and the consequences of delay. A system may collect more information than it can deliver promptly, so the handling of that difference should be an explicit design choice.
Define priorities using the information need rather than only the order in which files were created. A small set of timely, qualified observations may support a decision more effectively than a larger volume delivered after the relevant opportunity has passed. Preserve enough metadata to recognise each observation and its completeness during transfer. If compression, reduced products, or staged delivery are considered, evaluate how those choices affect the interpretation and subsequent processing of the information.
Test the delivery sequence with representative conditions, including interruptions and incomplete transfers. Establish how the receiving system verifies integrity, identifies missing components, and requests or schedules recovery where that is supported. Keep a record of actual delivery age and usable coverage. For a mission concept, these tests can be performed with simulated data flows before an operational claim is made. The objective is a delivery plan whose constraints are visible in the service that users receive.
Bring the evidence back to the decision
The practical outcome should be a short observation plan that another team can follow. It should name the decision, the required evidence, the responsible roles, and the conditions that trigger a field visit or further analysis. Keep the plan small enough to test, then revise it using the results of real inspections. A useful monitoring workflow improves because its assumptions are examined systematically, and its observations remain connected to decisions throughout the process.
Sources & further reading
Explore the bhumisat spacecraft concept and our vision towards 2030, or return to the journal.



