A useful observation programme begins with a decision that somebody can act on. Before selecting imagery or instruments, define the area of interest, the people responsible for inspecting it, and the time available for a response. This planning perspective connects remote measurements with the practical questions that shape a survey or monitoring service. The aim is to identify which observations would change a decision, how supporting evidence would be collected, and what should happen when information is incomplete. A clear plan makes later technical choices easier to assess against an operational purpose.
This working guide considers writing requirements from an earth observation need along mangrove forest margins. The immediate decision is to review changing mangrove cover. Useful reference evidence includes tidal context, canopy boundaries and representative field plots. The case is an illustrative planning context, with assumptions to check against the actual sensor, landscape and project requirements.
The setting: Mangrove forest margins
Mangrove monitoring takes place at a changing boundary between land and water. The observed surface depends on canopy structure, tidal conditions, exposed sediment and the arrangement of channels. A narrow fringe may contain a high proportion of mixed observations even when the surrounding image appears detailed. Begin by defining whether the task is mapping canopy extent, detecting disturbance or studying a forest attribute, and establish the spatial unit that the data can represent defensibly.
Comparisons between dates should account for water and sediment conditions as well as cloud, haze and shadow. A change near the canopy edge may reflect different water exposure or geometric alignment rather than a new loss of trees. Retain the acquisition dates and relevant tidal context where available. Mapping rules should distinguish canopy, water and other surfaces consistently, while acknowledging locations where their contributions cannot be separated reliably at the chosen resolution.
Field observations should describe canopy boundaries, vegetation structure and the setting of sampled plots or inspection points. Record whether a visit represents an edge, a channel margin or the forest interior. A mapped vegetation response alone cannot establish carbon stock, habitat quality or the cause of a disturbance. Those interpretations need suitable evidence. A practical initial product provides a traceable cover-change assessment and a prioritised set of locations where field review would resolve important uncertainty.
Translate a user decision into measurable behavior
A mission requirement should connect to a decision that someone needs to make with the observations. Begin by defining the target phenomenon, geographic area, relevant season and consequence of delay or error. A request to monitor crops is too broad to guide a spacecraft design. The useful question is which crop condition must be distinguished, at what field scale, how often, and with what confidence.
Translate these needs into product requirements before allocating spacecraft specifications. Consider spatial detail, spectral information, radiometric performance, location accuracy, usable revisit and delivery latency. Geometric revisit describes observation opportunities; clouds and acquisition constraints can make usable observations much less frequent. Define terms carefully so that a requirement for delivered, cloud screened coverage cannot be satisfied merely by showing an orbit access calculation.
Keep traceability through design and verification
Write individual requirements that can be checked using a stated method and acceptance criterion. Identify the conditions under which each applies, such as target brightness, viewing angle or operating temperature. Avoid combining several unrelated promises in one sentence. Retain a rationale and a link to the higher level need, allowing reviewers to understand why the requirement exists and what would change if it were relaxed.
Allocate performance across the payload, spacecraft, ground segment and processing chain. Image sharpness may depend on optics, detector sampling, motion and resampling. Delivery time may depend on acquisition planning, onboard storage, ground contacts and processing queues. Budgets make these contributions visible and expose conflicts between objectives. Preserve margin where uncertainty remains, and record assumptions rather than hiding them inside an optimistic headline specification.
Plan verification while writing the requirement. Inspection, analysis, demonstration and testing each provide different kinds of evidence. Define the test configuration, reference measurement, uncertainty and pass criterion early enough to influence the design. Verification asks whether the implemented system meets its requirements; validation asks whether that system serves the intended use. Representative users and realistic application examples can reveal an inadequate requirement even when every hardware test passes. Manage revisions through a controlled record that describes their consequences for dependent requirements, budgets and tests. This turns requirements into a working design tool rather than a document assembled only before a review.
Stratify forest reference observations
Forest landscapes can contain substantial variation in structure, composition, management history, and observation conditions. A reference plan should identify the forms of variation that matter to the intended analysis. Start with a clear target population and use available information to define meaningful strata. The objective is to represent the conditions in which the method will be used, rather than collecting only the most accessible or visually uniform examples.
Match the reference unit to the scale of the remote measurement. A field plot, an individual tree observation, and an image pixel can describe different portions of the canopy and ground. Record plot geometry, position, measurement time, and the procedures used to handle boundaries or incomplete coverage. Where geographic uncertainty is important relative to plot size, evaluate its potential effect before treating a difference between sources as a failure of the analytical method.
Keep the estimation and evaluation questions distinct. Reference measurements used to fit a relationship do not automatically provide an independent test of that relationship. Consider holding out suitable locations or forest conditions when evaluating transfer. Report the range of structure and conditions represented by the evidence, together with important gaps. A stratified reference programme becomes useful when it supports a clear interpretation of where a result is well supported and where further observations are required.
Maintain the geographic units of analysis
Many observation services summarise measurements within a field, management block, catchment, forest unit, or other mapped boundary. The meaning of that summary depends on whether the boundary accurately represents the unit being discussed. Start with a clear source for the geometry and record its date, coordinate reference, and intended use. A boundary drawn for visual orientation may require additional checking before it becomes a measurement unit.
Inspect overlaps, gaps, narrow fragments, and features that may have changed since mapping. A geometrically valid polygon can still describe an outdated operational unit. Ask the responsible team how divisions, mergers, new infrastructure, and management changes are recorded. Where pixels or reference measurements cross a boundary, define how they are assigned or excluded so that results remain comparable between analysts and processing runs.
Version the boundaries alongside the observations. If a unit changes, preserve a relationship between the previous and revised geometry rather than replacing the history without explanation. Comparisons through time should identify whether they use a constant spatial unit or the operational units valid at each date. This makes it easier to distinguish a change in the measured surface from a change introduced by the geography used to summarise it.
Bring the evidence back to the decision
The practical outcome should be a short observation plan that another team can follow. It should name the decision, the required evidence, the responsible roles, and the conditions that trigger a field visit or further analysis. Keep the plan small enough to test, then revise it using the results of real inspections. A useful monitoring workflow improves because its assumptions are examined systematically, and its observations remain connected to decisions throughout the process.
Sources & further reading
Explore the bhumisat spacecraft concept and our vision towards 2030, or return to the journal.



